Quality Inspector - Mechanical - Trinidad

The Quality Inspector Mechanical roles are as follows:

• Anticipate and resolve problems encountered in the field to eliminate costly rework or re-testing.
• Validates the approval, distribution and revision of procedures, Process Plans and Work / Operations Procedures for the overall Construction activity. Liaises with the Construction/Engineering Department where necessary.
• Identifies and evaluates Quality-related incidents / problems / non-conformances and initiates, recommends, and provides effective solutions where necessary.
• Responsible for the initiation, collection, disposition and retention of QA/QC records in a timely manner in accordance with documented procedures.
• Manages relationship with Sub-contracted companies to ensure compliance between subcontracted services and Client best practices.
• Liaises with HSSE representatives (internal, client & external) to ensure inherent compliance of documentation with MWG and Client safety standards.
• Liaises with MWG Quality Lead, Construction Superintendent, Construction Coordinators, Field Supervisors and SPA’s as work progresses and provide activity updates in the form of a QA/QC Daily Report covering all assigned Projects.
• Perform Audit surveillance as work progresses, avoid last minute discoveries, address repetitive non-compliance and monitor implementation of corrective actions in response to the identification of non-conforming products/services through QA/QC Audits or otherwise, until the unsatisfactory condition has been rectified.
• Perform site inspections at subcontractor workshops which include but not limited to Instrument Calibration, Control Valve testing, Material inspections.
• Review all inspection and testing reports for compliance, with reference to applicable industry codes and site standards/procedures.
• Conduct and document all in process Fabrication inspections.
• Coordinate and witness all NDE as per SOW.
• Review and accept all NDE Reports and film where applicable.
• Conduct and document all inspections required for blasting and coating activities.
• Develop and review Hydrotest Packages.
• Liaise with the site subcontractors’ QC inspectors for the resolution of site problems.
• Review of sub-contractor procedures and quality documentation such as ITP’s, Installation and testing procedures.
• Review and revise Massy Wood ITPs and Quality Procedures to be in alignment with Client Requirements and specification.
• Review of E&I devices inspection and calibration records including but not limited to Control valves, Electrical Instrumentations, Analog measurement Instrumentation, Telecommunication devices, for compliance with Project specification and acceptance Criteria.
• Review of Cable testing records for compliance to project specification acceptance criteria.
• Participation and quality presentation in daily toolbox talks.
• Active participation in Quality improvements drives.
• Maintaining a log of items that require corrective actions and reporting such to site construction Team in a timely manner.
• Punch listing of items and communication of such to the site construction leads.
• Completion of GO Completion ITR’s.
• Material Receipt compliance inspection.
• Fabrication and Load Out Bag & Tag verification
• Ensure the client is satisfied before, during and after work is completed.
• Performs all other related job functions as required.

• Diploma/Certification in Construction, Mechanical or Industrial Engineering from a recognized institution
• Certification/Training in Quality (must be based on ISO 9001:2015) from a recognized institution.  (For example CQE, CQA, CQT or CQI)
• Level I or Level II Radiographic Film Interpretation
• Certified Welding Inspector (CWI) with AWS
• NACE Level I certified
• Non-destructive Testing such as MT, PT, UT, and VT will be an asset 
• A minimum of three (3) years’ experience in a similar position
• A working knowledge of Construction / Structural / Inspection codes and practices such as API 570, 620 and 650, ASME B31.3, AWS D1.1, API 1104, ASME Section V and IX. NACE standards, ISO 8501 & SSPC Systems
• Inspector shall have direct knowledge of all aspects of heat treatment
• Shall demonstrate a working a thorough knowledge and proven ability of all phases and types of critical coating applications, methods, and recognized industry standards
• Hass a minimum, he shall have experience with: Installation of equipment such as, Pumps, Motors, Skids, Valves, Vessels, Compressors, Fired Heaters, Auxiliary Equipment, Packaged Equipment in plant construction….etc
• This role does not provide sponsorship.