Rigger

The Rigger/Slinger/Load Handler is responsible to sling loads for lifting, packing and any other task identified by the Chargehands/Checkers.

Roles & Responsibilities

General

• Ensure slings are not wrapped around sharp corners without suitable packing materials or shortened using knots or attached to a fitting that is smaller than sling rope in diameter.

• Stand clear while a load is lifted clear of the ground and landed, while slack is taken up with or without a load on the hook and must confirm to the Banksman/Signaler that he is clear.

• Control the load in the air using tag lines/push pull poles where appropriate.

• Knowledge on how to attach cables or ropes to the load. That includes knowing the right hitches to tie, and the load they can support safely.

• Knowledge and understanding of figuring out where the center of gravity has to be on a load to keep everything stable.

• Knowledge on the use of different types of rigging equipment such as slings, shackles, chokers and banding straps.

• Recognize any hazards associated with a lifting and moving job.

• Clean up and store all rigging equipment after use.

• Not touch a load being landed or attempt to manually stop a swinging load.

• Must not handle a load under any circumstances, unless below waist height

• Be easily identifiable and distinct from the Banksman/Signaller.

• Keep uninvolved personnel clear of the suspended load.

• Assist in the co-ordination and processing of all crane lifting operations.

• Assist in the transportation and logistics of lifting equipment.

• Responsible for ensuring that all equipment used is in compliance with legislation.

• Participate in and contribute to the day-to-day interface between lifting operations and any other affected areas.

• Assist with management and audits.

• Assist in accurate control and tracking of all lifting equipment.

• Contribute to expected company behaviors.

• Assist in maintaining a safe place of work

• Participate in and contribute to safety meetings and toolbox talks

• Follow all instructions (verbal or written) given by the Chargehand/Checker pertaining to Lifting operations or associated activities

• Assist with the planning of lifting operations

• Responsible for the cleanliness of the lifting operations/deck areas

• Assist with the loading/unloading of containers and cargo handling

• To assist in any activity once requested by Chargehands/Checkers or Shorebase Team Lead

• Must be onsite at all times during lifting operations or any operations that requires your assistance.

Personal and Operational Attributes

• Adherence to regulatory requirements

• Working with people

• Good communication and interpersonal skills are required, and an excellent attention to detail.

• Skilled with hand and power tools.

• Ability to lift 50lbs and traverse ladders.

Minimum Competencies (Skills, Knowledge and Behaviours)

• NSL Banksman/Slinger

• 5 CXC passes including Mathematics and English

• Team Player

• People Skills

• Knowing personal limitations regarding work skills and knowledge

• Previous experience working on ASCO sites will be an asset

• Clean Certificate of Character

Technical Competencies

• NSL Banksman/Slinger Competency Assessment

• Knowledge of regional legislation

• Knowledge of lifting operations planning.

• Personnel should be trained and assessed to industry recognised standards that comply with or are equivalent to industry recognised standards.

• Company internal competence standards have been produced as part of the overall training and competence programmes.

HSEQ

• In partnership with the HSE department, ensure the continuous improvement of safety and environmental performance and compliance to all laws, regulations and industry standards/codes.

• Reports all incidents or breaches of policy or regulations to the line manager.

• Fully endorse the ASCO ‘Stop the Job’ policy and commitment to proactive intervention where an unsafe act or condition is observed.

• Adherence to the ASCO’s integrated management system ensuring document control and improvements to key processes is maintained.

• Ensure all work is carried out in a safe manner, always complies with HSEQ procedures, GLP, working instructions and safety standards.